QLN Q10 STATIV HØYTTALER

Pris avhengig av finish

PrisNOK30 190,00 inkl. mva.
Ønskeliste
  • Produktinfo
  • Produktanmeldelser (0)

Introduction
Qln Prestige One and Q10 is sharing the same basic DNA as the Iconic Qln Signature speaker.
Many of the key elements have been borrowed from our Signature model, like choice of material and technical solutions.

All parts have an impact of performance, every material its own character. All parts have to be carefully chosen and their mixture needs to be balanced to make the perfect symbiosis between all involved components.
The ultimate goal is to make you listen and enjoy the music, and forget everything else.

DESIGN DETAILS

Cabinet
The cabinet is very small to house a 7” woofer. It’s tuned to naturally roll-off without any ringing in step response. The cabinet is made of 22mm thick HDF-board with our proprietary internal damping to minimise cabinet resonances. Organic wool is used for internal acoustic damping.

Crossover
Crossover is hardwired with Mundorf capacitors and baked air coils to avoid any internal component and filter resonances. The result is perfect timing within the crossover and throughout the entire frequency range.

Drivers
The drivers have been specifically selected and custom developed by industry renowned Danish driver manufacturer Scan-Speak and offers the latest in driver technology.
The 25mm wide surround tweeter offers a superb vocal presentation and excellent imaging in a wide listening area. Its large roll surround, built-in copper ring and textile dome diaphragm provides a flat frequency response above 30 KHz with an outstanding off-axis dispersion. A large rear acoustic chamber gives low compression and lower the tweeters system resonance far below the crossover point.

Cables and speaker connectors
Internal cabling is made from our own specially designed internal cable.
All components are carefully hand selected and individually measured to avoid any deviances. WBT pure copper NexgenTM speaker terminals are used with grip-friendly nuts.

Finish: matt valnøtt, matt hvit

 

specifications:

Impedance: 8 ohms
Amplifier requirements: 25-250 Watt RMS
Tweeter: 25mm, wide surround, soft dome with back chamber
Woofer: 178mm, fiber cone
Sensitivity: 88 dB SPL 1 Watt 1m
Low frequency performance: -3dB 52Hz
Cabinet: 21mm with Qboard® philosophy design
Terminal: WBT Single wire
Dimensions (HxWxD): 358x210x260
Weight: 12,0 kg each
Finish: Walnut matt

 

 
 

Skriv en produktanmeldelse og del dine erfaringer med dette produktet med andre kunder.