At the back of your speaker, at the terminal block, you will find 3 “-” terminals. Each of them corresponds to a different listening mode. You will thus have the possibility of 3 modes detailed as follows:
MODE 1 : or DIRECT mode connects your amplifier directly to the driver, without any filtering. To keep a perfect signal, the study of the internal cable was entrusted to the brand ESPRIT (France) (which uses a pure copper of quality 5n, a total section of 6.5 mm2, on nearly 1500 wires), the solderings are realized with a mixture tin-Silver, the terminal blocks are of German origin (WBT).
We recommend a distance of 3 or 4 meters minimum for an optimized listening. The dynamics are at their maximum. For this reason, we have created a mode 2:
MODE 2: or PROXI mode adds an RLC circuit (or cork circuit) that very slightly attenuates a part of the audible spectrum in the midrange and upper midrange/treble. It allows the speakers to be used in small rooms, subtly reducing the level between 600 and 7000 Hz. The purified crossover uses high quality components (including a Mundorf capacitor), to preserve all the dynamic qualities of the speaker. Listening at 2.5 m from the speaker is possible, even with “muscular” electronics.
The MODE 3 : or FT mode (for Foot-Tapping) consists in slightly increasing the level of bass and treble of the speaker. It nevertheless preserves the main character of the listening of a wide band, by ensuring a realistic, transparent and free side of the recording. This mode also makes it possible to listen to the loudspeaker in small rooms (with a weak distance (2 to 3 meters)).
The 3 listening modes remain nevertheless close to each other. Davis wanted to allow the installation of the new MV One in any interior. To reach its level of requirement, there is no doubt that the MV One MASTER owner will play on the connection (1, 2 or 3) of the speakers, in addition to the usual adjustments (positioning and orientation of the columns, choice of the associated electronics…).